Operates with most model 230vAC and Battery drills, new or old, with no special add-on tools required. Punches mild and stainless steel up to 152mm. The punches and dies are clearly marked with Centre Point™ marks for perfect alignment, no matter what direction you punch from. Lightweight and easy to use, the Gear Punch™ tool is compatible with other punch and die offerings.
Part No | Description |
---|---|
GP122 | Battery Powered Punch Driver |
Part No | Description | Hole Size | Quantity |
---|---|---|---|
GP01 | Punch Tool | - | 1 |
CP02 | Centre Point Knockout Layout Tool | - | 1 |
DS716 | ⁷⁄16” x ¾” Draw studs | - | 2 |
DS034 | ¾” x ¾” Draw Stud | - | 2 |
ND038 | ⅜” Nut Driver | - | 2 |
SB78 | ⅞” Step Bit | - | 2 |
PD01 | *½” Punch and Die | 22.5mm | 1 |
PD02 | *¾” Punch and Die | 28.4mm | 1 |
PD03 | *1” Punch and Die | 34.5mm | 1 |
PD04 | *1-¼” Punch and Die | 43.2mm | 1 |
PD05 | *1-½” Punch and Die | 49.6 | 1 |
PD06 | *2” Punch and Die | 61.5mm | 1 |
GPD02 | ½” – 2” Case | - | 1 |
Copyright © TEN Group | ABN 72 093 052 441