August, 2018

Klauke ESG-25-LAU - Battery Hydraulic Stay Wire Cutter

The Klauke ESG-25-LAU cuts stay wire and ACSR up to 25mm in diameter, making it the perfect replacement to hand operated hydraulic cutters. Benefit from improved safety, ergonomics and productivity
Find out more.
Salisbury Arc Flash Lift Front Hood with PrismShield
The Premium Lightweight Lift Front Hoods are now available with PrismShield Lenses that provides full colour recognition making sure workers can tell similarly coloured objects apart. The new lens also improves visibility in poorly lit areas increasing worker safety. With the lightest 40cal material on the market, the new lift front hoods are the market leading solution providing better ventilation, better visibility and a better safety outcome.
HDE Clear Test
The ClearTest™ Transformer Tester provides quick and easy tests of de-energized power distribution transformers. The handheld device with a single pushbutton provides a clear indication of open circuits, short circuits, including shorted turns or shorted windings. This allows workers to identify any transformer defects before energising. The ClearTest briefly energises the transformer and takes a snapshot of the transformer condition by measuring the voltage, current and power factor of the test signal.
Polywater Duct Sealant
FST™ Duct Seal is a closed cell foam solution for sealing empty and occupied conduits. Closed cell foam is far superior to open cell spray canned foams, providing a 22ft water head pressure over an extended period of time. Seal conduits and protect cable infrastructure from water, dirt, gases and rodents. The kit contains a cartridge filled with a two-part foam base, which is mixed in equal parts as it is pushed through a mixing nozzle. When mixed and injected, the foam expands and hardens, keeping contaminants out

MESA 2018

TEN recently exhibited at the MESA Conference 2018, and has now been involved with this event for 4 years. Our electrical infrastructure life extension products including Clampstar and Polywater PowerPatch were a hit with mining electrical safety and maintenance personnel.

Tech Corner
Trace Safe

Proudly distributed by TEN, Trace-Safe is simple to install, with no strip connectors and unique locate clip. The quality solid copper conductor is surrounded by water blocking yarns of woven polyester and a tough HDPE outer sheath – making it the most reliable and longest lasting trace wire solution on the market.
Glen Bau

P | F:+61 7 3212 8999 | 8998
M: 0499 996 441
Greg Witty

P | F: +61 3 9793 1622 | 1644
M: 0408 228 473
Customer Service

P | F:+61 8 9455 5574
Chris Bennetts

P | F:+61 7 3212 8999 | 8998
M: 0459 150 095
Top Page
Copyright ©2018 - TEN Group - All rights reserved.

Want to change how you receive these emails?
You can
update your preferences or unsubscribe from this list